- Clean and efficient roasting solutions with Outotec’s cutting-edge technology
- Closed circuit precious metals extraction with recycled halogens
- Conventional or high capacity thickeners a better choice to make
- Correlating microstructure with simulated process parameters in MG high-pressure die-castings
- Critical Aspects of low grade ore benefication
- Detecting the direction of flow in liquid aluminum using an inverse heat transfer technique
- Dissolution of low grade gold-bearing material with chloride chlorine solutions
- Drosrite plus treatment of aluminum and zinc drosses
- Elemental sulfur removal from hydrometallurgical leach residue via polysulfides process considerations
- Factors influencing the residence time distribution in continuously fed batch tapped furnaces
- Fluid red roasting of metal ores and concentrates for arsenic removal
- Hydrothermal preparation and characterization of LiMn2O4 for LI-ION Battery application
- Industrial evaluation of sonic injection in a pierce-smith converter at the lonmin platinum smelter
- Influence of the CaO2 Al2O3 and Fe3O4 Content in the slag of the Isamelt furnace at southern peru ILO Smelter
- Leaching Behavior of the roasted nickel calcine
- Liquid-liquid-liquid three phase extraction a promising strategy for multi-metal separation from complex systems
- Major reduction of the environmental footprint in concentrate drying
- Management of environmental emissions at boliden harjavalta oys smelter
- Mechanochemical processing of enargite from arsenic elimination to nanocopper production
- Metallurgical process advances historically reduce resource use and pollution
- Open access to metallurgical publications
- Preliminary investigation for the development of a leaching technology for gold extraction from the buzwagi copper sulphide ores
- Red herrings on the path of technology development capital destruction in the pursuit of a bad idea
- Redesign of furnace no. 1 at the pobuzhsky ferronickel combine
- Saprolite leaching and iron control in magnesium chloride brines
- Simultaneous recovery of valuable metals from automotive catalysts through hydrometallurgical processing
- Technology of high-purity silicon dioxide production
- The capture concentration and conversion of waste heat to electricity in pyro-metallurgical industries
- Thermal plasma torches for metallurgical applications
- Towards sonic injection in peirce smith converters a computational fluid dynamics (cfd) modelling study
- Treatment of hydromet processing crude using decanter centrifuge
- Triple segmented intercell bar a contribution in copper electrowinning
- A Mathematical model for direct thermal heat recovery from metallurgical slags
- Bioleaching of pyrrhotite tailings for NI Extraction Initial scoping tests