- The product development and continuous improvement process for refractories in the base metals industry – A text book and practical perspective
- The upper ore body, a new dimension to Nchanga underground mining operation
- The use of sulphuric acid in the mineral sands industry as a chemical mechanism for iron removal
- Tomorrow’s technology-out of Africa-today
- Uranium recovery from acid leach liquors The optimisation of RIP-SX based flowsheets
- Water balances in hydrometallurgical refineries
- Water reduction at Skorpion Zinc and the impact on the environment
- What scale should your smelting testwork be done at, and what do you get for the money you spend
- 10 years of Zinc market development in Southern Africa (Keynote address)
- A case study on the operation of a Flottweg Tricanterr centrifuge for solvent-extraction crud treatment at Bwana Mkubwa, Ndola, Zambia
- A comparison of large bead ion exchange resins for recovery of base metals in resin-in-pulp (RIP) circuit
- A comparison of the effect of chemical and bioleaching on the kinetics of sphalerite leaching
- A review of the application of molecular recognition technology (MRT) for Ni-Cu-Co hydrometallurgical process separations and for the purification of cobalt streams
- Addressing the challenges of sustainability in the mining industry
- An assessment of pentlandite occurrence in the run of mine ore from BCL mine (Botswana) and its impact on the flotation yield
- An introduction to the Rados XRF ore sorter
- Anglo Research (AR) experiences with integrated comminution and flotation plant modelling
- Assessing the performance and capacity of matte leaching using predictive models
- Base Metals Conference 2011
- Base metals heap leaching applications and process parameters
- BCL sulphur capture options
- Cadmium removal from cobalt electrolyte
- Can we decrease the ecological footprint of base metal production by recycling
- Cave management and secondary breaking practices at Palabora Mining Company
- Cobalt processing developments
- Commissioning of the 375 ktpm Autogenous Milling Circuit at Nkomati Nickel
- Comparison of solvent extraction and selective precipitation for the purification of cobalt electrolytes at the Luilu Refinery, DRC
- Copper and cobalt extraction from sulphate solution using natural clinoptilolite
- Cover and Contents
- Cover and Contents-1
- Development of a mineral flotation frother for Nchanga Mine on the Zambian Copperbelt
- Development of effective solvent-extraction process control-low cost implementation value-addition to hydrometallurgical copper operations
- Dissolution of six sulfide concentrates in the hydrocopperr environment
- Effective use of energy in the flotation process
- End-of-life mode of failure of a zinc sulphide concentrate fluidized bed roaster and its rebuilding
- Evaluation of various durability tests to assess resin for in-pulp applications
- Exploitation of a massive low grade zinc-lead resource at Rosh Pinah Zinc Corporation, Namibia
- Extending the application of the AMIRA P754 Code of Practice for Metal Accounting
- Flowsheet considerations for copper-cobalt projects
- Grade control blending and selectivity for optimal process performance at the Skorpion Zinc Mine, Namibia
- High pressure grinding moving ahead in copper, iron, and gold processing
- Impact of poor fragmentation on cave management
- Implementing strategies to improve mill capacity and efficiency through classification by particle size only, with case studies
- Improved flow and flotation monitoring for process efficiency improvements through new technology utilizing non-invasive passive arrays
- Increasing the capacity of grinding circuits without installing more mills
- Industrial trial of Minteks Xanthoprobe at the Eland Platinum Concentrator
- Intelligent gearing system-Solution to understand and correct operational conditions that reduce the fatigue life of a girth gear
- Investigation of factors influencing the determination of discount rate and the application of quantitative methods for discount rate using risk factors in the minerals industry
- Investigation of sorting technology to remove hard pebbles and recover copper bearing rocks from an autogenous milling circuit
- Keeping open of underground blast holes
- Laboratory and pilot-plant investigations into the performance of a synergistic versatic 10 acid solvent extraction system for the recovery of nickel from calcium-saturated streams
- Larox horizontal vacuum belt filter with side vacuum
- Leaching kinetics of Cu, Co, Zn, Pb and Fe from copper smelting slags cooled in different ways after tapping
- Manganese removal from cobalt solutions with dilute sulphur dioxide gas mixtures
- Maximizing the value derived from laboratory test work towards heap leaching design
- Microwave-assisted So2 flushed acid leaching of mixed cobalt-copper oxidized ores
- Milestones in the improvement of nickel and copper recoveries at BCL
- Milling circuit selection for Nkomati 375 ktpm concentrator
- Milling technology selection for the Tati Activoxr Project base on pilot scale ultrafine milling test work on nickel sulphide concentrates
- Mineral endowments and developing economies
- Modernisation of the BCL smelter
- ‘Necessity the mother of invention’ A reflection on the requirements for successful innovation in the metallurgical industries
- Novel design aspects of the Tati Activoxr Project ammonia recovery circuit
- Novel redesign of a pressure leach autoclave by a South African platinum producer
- Oxidative precipitation of Fe and Mn by AIR-SO2
- Parameters influencing the leachability of calcines emanating from microwave roasted sphalerite and pyrite concentrates
- Piloting of the Ishigaki Fibre-Wakishimizu-(Fibre media rapid filtration equipment) at Skorpion Zinc
- Pilot-plant study of sulfuric acid extraction from a nickel electrolyte using Alamine 308
- Planning a new analytical laboratory for an uranium mine taking automation into consideration
- Pre-concentration of low grade lateritic sulphide nickel ore
- Process development of the Nkomati PCMZ base metals sulphide ore
- Reconciliation along the base metal value chain
- Recovery of uranium from dense slurries via resin-in-pulp
- Remote mine wide communications
- Review of selective separations of cobalt, uranium, zinc, nickel and associated contaminants from various process streams
- RIP pilot plant for the recovery of copper and cobalt from tailings
- Rock support in Southern African hard rock mines
- Skorpion Zinc Optimization and innovation
- Skorpion zinc solvent extraction the upset conditions
- Soluble metal recovery improvement using high density thickeners in a CCD Circuit Ruashi II a case study
- Solvent extraction test work to evaluate a versatic 10 NicksynTM Synergistic System for nickel-calcium separation
- Technologies for the base metal casting industry in Southern Africa The impact of rapid prototyping
- The application of bioleaching to base metal sulfides in Southern Africa prospects and opportunities
- The application of GRP and thin spray liner support products in a typical block cave mining method to enhance safety and productivity
- The challenge of technology adoption and utilisation in the mining industry-A focus on open pit mining technologies
- The Democratic Republic of Congo and Zambia A growing global Hotspot for Copper-cobalt mineral investment and exploitation
- The effect of gangue mineralogy on the density separation of low grade nickel ore
- The impact of a crushing plant upgrade and DMS pre-concentration on the processing capability of the Tati nickel concentrator
- The influence of water quality on the flotation of the Rosh Pinah complex lead-zinc sulfides
- The mechanisms of the passivation of sulfide minerals in oxidative leaching processes
- The minerals industry and syndicated research
- The new generation polyester resin capsule support for rock bolt solutions to the mining industry
Menu
Menu