Fire Assay of Copper
This assay is presented here, not with the purpose of giving the student an accurate and handy means of estimating copper in its ores, but to give him some practice in manipulation, which, on the small scale, somewhat resembles metallurgical methods. In all modern mining fields the fire-assay of copper is replaced by the Volumetric […]
Water Analysis Methods
In this section eight chapters are given, each dealing with one or more technical methods of analysis. The typical technical method should be quick, accurate, and inexpensive. Accuracy may to some extent be sacrificed in favour of speed when the quantity and effect of such inaccuracy are approximately known, yet it should always be the […]
Chimney / Furnace Gase Analysis
In chimney or furnace gases the estimations usually made are the percentages by volume of oxygen, nitrogen, carbon-monoxide, and carbon-dioxide. The more refined methods of gas analysis are too slow for technical requirements, and are replaced by the Elliott, Hempel, or other methods. The method here to be described is that of Hempel, and differs chiefly from the Elliott and others […]
Coal and Coke Analysis
For technical purposes the following estimations may be required: Moisture, Volatile Matter, Ash, and Fixed Carbon; Sulphur, and Phosphorus. Carbon and Hydrogen by ultimate organic analysis. The calorific (or heating) power of the coal. Besides the chemical analysis of cokes, there are required the “Crushing resistance,” “Porosity,” and “Specific Gravity.” For information concerning these tests, and […]
Chemical Composition of Cements
A suitable material for the student to operate on is the well known brand —Portland Cement. As the student has already examined in detail a silicate, the following notes are given somewhat briefly. A good cement should consist chiefly of SiO2 and CaO, with a little Al2O3 and Fe2O3, and less than 2% MgO, and […]
Shale Oil, Petroleum, and Lubricating Oil Analysis
The subject here touched upon is one that can only be successfully handled by an expert chemist with a thorough training in both inorganic and organic chemistry; yet, as the metallurgical chemist may be asked to value a shale or petroleum, examine an oil for lubricating purposes or for the preservation of winding ropes—for these […]
How to Prepare a Sample for Assaying
Assaying has for its object the determination of the quantities of those constituents of a material which add to or detract from its value in the arts and manufactures. The methods of assaying are mainly those of analytical chemistry, and are limited by various practical considerations to the determination of the constituent of a small […]
Copper & Lead Slag Analysis
For technical purposes it is rarely necessary to determine all the constituents present in a slag. The lead or copper smelter wishes to know the lead or copper contents of his slags; also their silver and gold contents (if any), and, as a rule, the silica, ferrous oxide, and lime present. Certain other constituents, such […]
Iron & Steel Composition
Such matter is presented in this chapter as will give the student some insight into the methods of analysis used in the technical examination of iron and steel. The nature of this work prevents a detailed treatment of the subject—a treatment which may demand an estimation of any one or more of the following substances:—Carbon […]
Wet Gravimetric Assay Methods
In dry assays the metal is almost always separated and weighed as metal; in wet gravimetric assays the metal is more usually weighed in the form of a definite compound of known composition. The general methods of working resemble those of ordinary chemical analysis, and their successful working is greatly helped by a knowledge of, […]